ECKELMANN UA 400 - Menu 1 Actual Values UA 111 D

Firmware V3.15
21.04.2021
174/401
•
•
9.2.2 Menu 1 Actual Values UA 111 D
ACT VALUES POS: XXXXX
1 Temp. Sensor Move to menu 1-1
2 Cooling Zone 1 Move to menu 1-2
3 Defrost Zone 1 Move to menu 1-3
4 Not used with this controller type
5 Alarm Move to menu 1-5
6 Frame Heater Move to menu 1-6
Menu1-1Temp.Sensor
TEMPERATUR Pos: XXXXX
Temp. R2.1 xxx °C Current supply air temperature Input Z11/ Z12
Temp. R4.1 xxx °C Current return air temperature Input Z21/ Z22
Temp. R2.2 xxx °C Current supply air temperature Input Z31/ Z32
Temp. R4.2 xxx °C Current return air temperature Input Z41/ Z42
Temp. R2.3 xxx °C Current supply air temperature Input Z51/ Z52
Temp. R4.3 xxx °C Current return air temperature Input Z61/ Z62
Temp. R2.4 xxx °C Current supply air temperature Input Z71/ Z72
Temp. R4.4 xxx °C Current return air temperature Input Z81/ Z82
Temp. R2.5 xxx °C Current supply air temperature Input Z91/ Z92
Temp. R4.5 xxx °C Current supply air temperature Input Z01/ Z02
Menu1-2CoolingZone1
COOLING 1 Pos: XXXXX
Compressor 1 xxx Current ON/OFF status Compressor 1
Comp Run Tm 1 xx % Compressor 1 on time during last days (00:00 - 24:00 hours)
Comp. Starts 1 0 Compressor 1 actuations during last days
Compressor 2 xxx Current ON/OFF status Compressor 2
Comp Run Tm 2 xx % Compressor 2 on time during last days (00:00 - 24:00 hours)
Comp. Starts 2 0 Compressor 2 actuations during last days