ECKELMANN UA 400 - Terminal Assignment of the CI 320;TTY Interface

Firmware V3.15
21.04.2021
124/401
7.13 Terminal assignment of the CI 320/TTY interface
TheCI320/TTYinterfacecanbeusedforthefollowing:
A:Readingoffthecontroller'soperatingdatawiththesoftwareLDSWin,or
B: Integrating the case controller as replacement controller in the LDS legacy system:
in order to read off operating data with LDSWin a TTY interface adaptor is required (optional
accessory). For further information on the TTY connection see the LDSWin operating instruction. For
the integration in the LDS legacy system, please consult the documentation "Connection of a universal
UA 300 case controller to the legacy system LDS 350";seehttps://edp.eckelmann.de/edp/lds/
_A3hQ1UvZac.
