ECKELMANN UA 400 - Updating Firmware

Firmware V3.15
21.04.2021
20/401
4.3 Updating firmware
The case controller is supplied with the current firmware, ready for operation. Future software versions can be
loadedintothecasecontrollerasrequiredbymeansofafirmwareupdate,andthusupdated.
Danger data loss!Insomecasesachangeoffirmwareversioncanleadtothelossofallthesetpoints
in the case controller. As a precaution, the settings must be backed up by saving them to the LDSWin
PCsoftware,priortotheupdate.Afterthefirmwareupdatethebackupsettingscanbereloadedinto
the controller from LDSWin. A software update is only to be carried out by trained staff or factory-side
bythemanufacturer.FurtherdetailsonfirmwareupdatescanbefoundinchapterFirmware Update.
