ECKELMANN UA 400 - Order Numbers and Accessories of UA 400; UA 410; Case Controller; Components

Firmware V3.15
21.04.2021
401/401
1.
2.
3.
13 Order numbers and accessories of UA 400 / UA 410
13.1 Case controller
Type Description Part number
UA 400 AC For 2 thermostatic expansion valves, for DIN rail mounting, with
CAN bus, real-time clock, internal archive
KGLUA4N011
UA 400 CC For 2 thermostatic expansion valves, for DIN rail mounting, with
CAN bus
KGLUA4N012
13.2 Components
Component Description Order number
Temperature sensors
(NTC)
L243 (Standard) 3,0 m, 5,8 m
5K3A1 8,5 m
L243 (K243) Block sensor (old design)
KGLZTEMP56
KGLZTEMP58
KGLZ5K3A1
KGLZL243
Pressure transmitter Low pressure transmitter 0..10 bar 4..20 mA
High pressure transmitter 1..26 bar 4..20 mA
1..61 bar 4..20 mA
1..161 bar 4..20 mA
KGLZDRUCK3
KGLZDRUCK4
KGLZDRUCK5
KGLZDRUCK6
Humidity and
temperature sensor
Combined humidity sensor (4..20 mA) and temperature
sensor (Pt1000 4-wire) for wall mounting
KGLZPTHYGR
BT 300 x Operator
Interface and
Temperature display
BT 300 M Operator Interface handheld operating terminal
for
customer service with 2,8 m connecting cable
BT 300 S Operator Interface for panel mounting
BT 300 C For cabinets and serve over counters
LIBDTUA052
LIBT300S51
LIBDTUA051
BT 30
Temperature display
Temperature display with 7 m connecting cable (RJ45)
RJ45 splitter for the connection of up to four BT 30 on an
case controller
BT30LC0002
KGLVERT001
USB-A-B cable USB-A-B cable with ferrite core
For direct parameterisation of the case contr. via
LDSWin or
For carrying out a firmware update of the case
controller or
The parameterisation of system components via
CAN bus using LDSWin
PCZKABUSB1
Connector set Connector set for UA 400 E CC STVSETUAB3