ECKELMANN VS 300 - Page 126

Parameter List and Menu Structure of VS 300
118
Doku-Version 2.05 - Firmware 2.10 - 15. September 2017
Level 1 Level 2 Level 3 Screen No. Screen Name
Setpoints CL1 Control
3-2 SETPOINTS
Control type 3-2-1 CL1-CONT
to-adjustment 3-2-2 to-adjust.
Actuating times CL1 3-2-3 LOAD TIMES
LP/HP control day CL1 3-2-4 LP/HP-CONT D
LP/HP control night CL1 3-2-5 LP/HP-CONT N
CL2 Control
3-3 SETPOINTS
Control type 3-3-1 CL1-CONT
to-adjustment 3-3-2 to-adjust.
Actuating times CL2 3-3-3 LOAD TIMES
LP/HP control day CL2 3-3-4 LP/HP-CONT D
LP/HP control night CL2 3-3-5 LP/HP-CONT N
Monitoring Show/change setpoints 3-4 Monitoring
Inputs
3-5 INPUTS
Input 1 3-5-1 INPUT 1
Input 2 3-5-2 INPUT 2
Input 3 3-5-3 INPUT 3
Input 4 3-5-4 INPUT 4
Alarms Show/change priority setpo
ints
3-6 MESSAGE
Parameter backup Back up basic parameters 3-7 VS 300
Clock
4 CLOCK
Current time 4-a CLOCK
Setpoint toggle CL1 4-b CLOCK
Setpoint toggle CL2 4-c CLOCK
Alarms
5 MESSAGE
Display Show alarms 5-1 MESSAGE
Delete Delete/reset alarms 5-2 MESSAGE
Operating Data
6 OP DATA
Run times CL1 Show run times CL1 6-1 OP DATA
Run times CL2 Show run times CL2 6-2 OP DATA
Daily operating data
CL1
6-3 History CL1
Run times 6-3-1 History CL1
Run times day 6-3-2 History CL1
Run times night 6-3-3 History CL1
Starts 6-3-4 History CL1
Starts day 6-3-5 History CL1