ECKELMANN VS 300 - Compressor Pack Activity; Utilization

Function of VS 300
60
Doku-Version 2.05 - Firmware 2.10 - 15. September 2017
4.7.5 Compressor pack activity / utilization
Activity is calculated by the following formula:
Activity  L


[
n 
(
T
1
 T
0
)
]
Activity : Percentage activity of compressor pack
L : Total of all run times
n : Number of control stages installed
T
1
: Current time
T
0
: Turn of day
The current status is displayed in percent. Daily activity of the compressor pack is calculated for the first and
second setpoint and the total run time.