ECKELMANN VS 300 - 1.3 Intended Use and Safety Rules

iii
Doku-Version 2.05 - Firmware 2.10 - 15. September 2017
4.6.2 Restart 58................................................................
4.7 Archiving of operating data 58...............................................
4.7.1 Compressor/fan operating hours 58..........................................
4.7.2 Daily run times 59.........................................................
4.7.3 Compressor / condenser daily run times 59...................................
4.7.4 Compressor / condenser starts 59...........................................
4.7.5 Compressor pack activity / utilization 60......................................
5 Startup of VS 300 61......................................................
5.1 Connection and safety notes 61.............................................
5.2 Installation 62.............................................................
5.3 Startup 63................................................................
5.3.1 Basic parameter settings on hardware 63.....................................
5.3.2 Software settings 63.......................................................
5.3.2.1 First start – Loading default settings 64.......................................
5.3.2.2 Changing the access level 64...............................................
5.3.2.3 Setting the CAN Bus address 66............................................
5.3.2.4 Configuring the controller 66................................................
5.3.2.5 Setting the current date and time 67.........................................
5.3.2.6 Other parameters to be set 68...............................................
5.3.2.7 Parameter backup 68......................................................
5.4 Battery replacement 69.....................................................
5.5 Firmware update 69........................................................
5.5.1 Requirements 69..........................................................
5.5.2 Updating the firmware 70...................................................
6 Pin and Terminal Assignments of VS 300 75................................
6.1 View of connecting terminals 76.............................................
6.2 Pin assignments and their function 77........................................
7 Operation of VS 300 79....................................................
7.1 Integral display, indicators and controls 79....................................
7.1.1 Display and LEDs 79.......................................................
7.1.2 Controls 81...............................................................
7.2 First start – Loading default values 82........................................
7.3 Menu and operating structure of VS 300 82...................................
7.4 Parameter setting – general 83..............................................