126
126
Navigation
Navigation
■ Selecting a frequently used
destination (Smart History)
Destinations that have been set previously
are displayed in the History list. The two most
recent destinations are displayed on the
destination menu allowing you to select them
easily. Smart History uses conditions such as
the current time, date, and position, and
displays a position in response to the user's
navigation habits. The more you use the
navigation system, the more accurate the
anticipated destination becomes.
1
If the Map screen is displayed, touch
to return to the navigation
menu.
2
Touch on the navigation menu.
3
Touch destination or in the
History field.
4
The map is displayed in full-screen
mode with the selected point at the
centre. If necessary, you can touch
another point on the map to change
the destination. The cursor ( ) is
displayed at the new position. Touch
to set the destination, or touch
to select another destination.
5
After a summary of the route plan is
displayed, the entire route is displayed
on the map. The route is researched
automatically. Touch to change
the route plan, or touch to start
navigation. (When the countdown is
displayed in the “Go!” button, guidance
begins automatically after 10 seconds
even if you do not touch the button.)
Next
Back
Go!
To Next Page
Loading...
Need help?
General
