Eclipse AVN827GA - Loading and Unloading an SD Memory Card; Loading an SD Memory Card

25
25
Insert an SD memory card into the slot.
■ Loading an SD memory card
CAUTION
IMPORTANT
● The display will open to reveal the
insertion slot.
● Insert the SD memory card with the label
on the left side.
● Make sure that the SD memory card is fully
inserted.
ATTENTION
● Insert the map SD card without locking it.
● If you insert an SD memory card that
contains image data, you can preview the
images, play a slideshow, or set an image as
the Opening screen. (See page 260)
Loading and Unloading
an SD Memory Card
● You may not be able to open or close the
display when the gearshift lever is set to P
in an automatic transmission car or 1/3/5
or r in a manual transmission car; or
when a bottle or a similar object is placed
in the cup holder. To open or close the
display safely, set the gearshift lever to N
(automatic transmission car) or to the
Neutral position (manual transmission car)
in advance, or empty the cup holder. Make
sure that the car is not in motion by
applying the parking brake and
appropriately stepping on the foot brake in
order to prevent damage or injury.
● Do not place a cup or can on the display
while the display is opened. Doing so may
damage the display.
● When an SD memory card is loaded, do
not press or .
● Position an SD memory card with the 1
mark at the far end and insert it until it
makes a “click” sound. When it makes
contact with the stopper inside, the card
cannot be inserted any further. Do not try
to forcibly push the card.
● Before inserting a miniSD card, microSD
card, miniSDHC card or microSDHC card,
be sure to attach the card to the special
adapter. (If you insert only the miniSD
card, microSD card, miniSDHC card or
microSDHC card, you may not be able to
remove it.)
Close
1
Press .
2
Touch .
3
Insert the SD memory card.
4
After an SD memory card is inserted,
touch or press to close
the display.
Full Open
Close