250
250
How to Operate Portable Audio Devices
Using Bluetooth Audio
A Bluetooth-supporting portable audio player (“portable device” hereafter) can be used as a
source for this unit by utilising the Bluetooth wireless communication technology. To use a
Bluetooth-supporting portable device with this unit, it is necessary to perform Bluetooth
registration and connection settings.
● The Bluetooth-supporting portable device connected to the unit must be a portable device
which supports the relevant Bluetooth specifications. For the Bluetooth specifications
supported by this unit, see “About the Compatible Bluetooth-Supporting Devices” on page
259.
● Bluetooth is a short-range wireless technology for connecting mobile phones, computers
and other such devices.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by FUJITSU TEN LIMITED is under license. Other
trademarks and trade names are those of their respective owners.
● This unit can be used with Bluetooth-supporting portable devices.
● For details of Bluetooth operations, see the portable device or mobile phone instruction manual.
● Factors in the surrounding environment may negatively affect the connection status and prevent
Bluetooth audio operations on the unit.
● BTA feature is subject to portable devices or mobile phone compatibility.
Before Using Bluetooth Audio
● The frequency band used by this unit is the same band that is used by industrial, scientific and
medical devices such as microwave ovens, facility wireless stations used for identifying moving
objects in factory production lines and other locations (wireless station that requires a license),
special low output wireless stations (wireless station that does not require a license), and
amateur radios (wireless station that requires a license). (The 3 types of wireless stations above
are hereafter called “other wireless stations”.) Before operating this unit, make sure that no
“other wireless stations” are operating nearby. If the unit causes harmful radio wave
interference in “other wireless stations”, immediately change the location to stop the radio wave
interference.
● The frequency band used by this unit is the 2.4 GHz band.
● The FH-SS modulation scheme is used.
● The estimated distance in which interference may occur is less than 10 m.
● This unit uses the full band, making it possible to avoid the band of devices that identify moving
objects.
● This unit complies with the standards specified by the Radio Act and Telecommunications
Business Act in Japan. The stickers attached to the product certify this. Do not remove the
stickers.
● Disassembling or modifying this unit is punishable by law.
To Next Page
Loading...
Need help?
General
