23
23
● The disc will be ejected automatically.
When the screen shines due to ambient
sunlight, you can adjust the angle of the
display.
1
Press .
2
Touch .
3
After the disc is ejected, touch
or press to close the display.
Adjusting the Display
Angle
When adjusting its angle, take care not to
pinch your fingers. Otherwise you may hurt
yourself or the display may fail.
● Do not load a disc when the display is
tilted. If this caution is not observed, this
receiver or the disc may be scratched.
● When adjusting the display angle, use the
following notes.
Automatic transmission (AT) car:
Adjust the display angle so as not to get in
the way when shifting the AT lever to any
of the P, r, or N positions. (If the lever shift
is interfered with, do not tilt the display.)
Manual transmission (MT) car:
Adjust the display angle so as not to get in
the way when shifting the MT lever to any
of the 1/3/5 or r positions. (If the lever
shift is interfered with, do not tilt the
display.)
To Next Page
Loading...
Need help?
General
