56
56
Bluetooth Handsfree Operation
Before Use
● The Bluetooth mark is displayed for mobile
phones with an active Bluetooth
connection.
● The connection between the mobile phone
and the unit is complete. The Bluetooth
signal icon, battery level indicator, roaming
area icon (only when in a roaming area),
and reception indicator appear on the
screen.
● If the connection fails, “Connection failed”
appears on the screen. If this happens,
perform the connection operation again.
● Connection is not possible if no mobile
phones are registered.
● On the Connect Phone screen, touch
to register a mobile phone.
● When processing a Bluetooth connection,
the Bluetooth Audio may skip.
■ Cancelling a mobile phone
connection
3
Select the mobile phone that you want
to connect.
4
Touch .
5
When the connection is complete,
“Connection Completed” appears.
Connect
1
On the handsfree screen, touch
.
2
Touch .
3
Select the mobile phone with the
connection that you want to cancel.
Settings
Connection
To Next Page
Loading...
Need help?
General
