Eclipse AVN827GA - Setting Low Pass Filter

180
180
Volume Control
Basic Operations
■ Setting low pass filter
The low pass filter cuts out frequencies
higher than the set frequency (high-band
frequencies) and allows lower frequencies
(low-band frequencies) to pass.
● When or is selected,
touch the frequency or button
to adjust the frequency (63 to 200).
● After completing the adjustment, touch
to save the adjusted settings and
return to the previous screen.
1
On the Sound Settings screen, touch
in Woofer Settings.
2
Touch , or
in Slope.
Adjust
6dB/oct
12dB/oct
Pass
6dB/oct 12dB/oct