84
84
Before Using the Navigation System
Read First
After the initial setup, the navigation menu is
displayed and you can start using the
software.
When you touch on the navigation
screen or the multi screen, the navigation
menu (main menu) appears. You can access
all of the software's functions from this menu.
The following options are available.
● Touch , and then select which
method to use to reach your destination by
entering the address, selecting a favourite
spot, selecting a position on the map, or
selecting from the destination list. You can
also select recent destinations from Smart
History, or enter coordinates into the
system.
● When you touch , each point
on the route, or a path log on the map is
displayed for the entire journey. You can
also perform various route related
functions such as editing or cancelling the
route, setting the route departure point,
selecting a different route, avoiding a part
of the route, performing a navigation
simulation, or adding an entry to the
destination list.
● When you touch , you can set the
navigation software operating method,
start the tutorial, show a demo route
simulation, or start various other auxiliary
applications.
● Touch to start navigation on
the map. The button itself shows the
current position, recommended route, and
reduces the surrounding area to display on
the map being used. Touch the button to
display the previous screen mode
(Navigation screen or Multi screen).
● Touch to open the Traffic Summary
screen.
5
Change the initial route plan settings if
necessary. Touch to continue.
You can change this at any time from
Route Settings. (See page 148)
6
This completes the initial setup. Touch
to continue. After setting up,
you can run the Setup Wizard at any
time from the Settings menu. (See
page 143)
Navigation Menu
Next
Find
Show Map
To Next Page
Loading...
Need help?
General
