20
20
About This Receiver
Before Use
This unit switches on automatically at ignition, and when started for the first time, it displays the
Navigation setting screen
*
. When the engine is switched off, the unit also switches off.
* The second and subsequent times that the unit is started, the mode screen that was last in use is
displayed. If the last mode in use was the Navigation screen, then your current position will be
displayed. If the last mode in use was the Audio screen, then your last audio selection will be
displayed.
■ Turning on the power
● turns down the tone during system startup. After system startup, wait until the tone
is turned up, and then touch .
Do not press the voice recognition button (External microphone/Steering Wheel Switch) without
touching on the Caution screen. Otherwise, Navigation commands cannot be used.
Turning the Power On or Off
1
The Caution screen is displayed automatically. When you touch , the
Navigation setting screen appears.
I Agree
I Agree
<Caution screen> <Navigation setting screen>
<Opening screen>
To Next Page
Loading...
