238
238
Visual Operations
Using a VTR
You can watch a video by connecting a
commercially available VTR.
a Settings switch
b AUDIO button
● To connect a VTR, first purchase a
connection cord.
● Before using a VTR with this unit, be sure to
read the instruction manual of the VTR
carefully to make sure that there will be no
problems when using it with the unit.
● You can watch a video only when you have
stopped your vehicle and applied the
parking brake to ensure safety, and turned
the ignition switch to ON or ACC ON. (If the
source is switched to VTR while the vehicle
is in motion, only the audio function
operates.)
■ Playing a VTR
● The VTR screen appears.
● Touch the video to show it in a full-screen
display. To display the operation switches
(touch switches) again, touch the full-
screen display.
● Full-screen display
● Depending on the type of connected device,
the video may not display correctly.
● For details of operations on the VTR, see the
VTR's instruction manual.
Using a VTR
To ensure safe driving, video is disabled
while driving.
Connect the connection cord correctly so
that it does not interfere with the safe
operation of the vehicle.
1
Connect a commercially available
VTR and start playback.
2
Press .
3
Touch .
AV IN
To Next Page
Loading...
Need help?
General
