Eclipse AVN827GA User Manual

96
96
Before Using the Navigation System
Read First
Map operations
You can touch a position on the map, and then check that position during navigation. The
map's current position tracking function stops (the car marker (a blue arrow by default) is not
fixed in position on the screen), and the control buttons are displayed allowing you to change
the map display.
Operation Button Explanation
Using drag &
drop to move the
map
No buttons You can move the map in any direction you want by touching and
holding the map, and moving your finger in the direction you want to
move the map.
Zoom in/Zoom
out
/
Change the area of the map displayed on the screen.
Road names and other characters are always displayed in the
correct direction and at the same font size, and you only need to
check necessary roads and icons.
In 3D mode, the map cannot be reduced endlessly. The map
changes to 2D mode if you zoom out beyond the defined amount.
The display changes slowly if you tap the button, or changes in a
smooth, continuous motion if you touch & hold the button.
Tilt up/Tilt down
/
In 3D mode, you can change the vertical display angle of the map.
The display changes slowly if you tap the button, or changes in a
smooth, continuous motion if you touch & hold the button.
Rotate left/
Rotate right
/
Changes the horizontal display angle of the map.
The display changes slowly if you tap the button, or changes in a
smooth, continuous motion if you touch & hold the button.
2D or 3D display
/
Touch this button to switch the map display mode between a 3D
bird's-eye view and a flat 2D view.
Compass in 2D
or 3D map
display mode
/
The compass direction indicates North. Touch this button to change
to a North Up display, and then touch it again to return to the
direction previously displayed.
Point information Touch this button to open another screen displaying information on
the selected map position (cursor).
Return to normal
navigation
Touch this button to return the map to the current GPS position.
Auto map rotation is also enabled.
The map operation buttons are hidden, and navigation restarts.
Additional
functions
Touch this button to display the additional functions list. For
example, saving the cursor to the destination list, and searching the
area around the cursor.
Selecting a
destination
Touch this button to select the cursor as a new destination. The
route is researched automatically.
Back
More
Select

Eclipse AVN827GA Specifications

General

Brand	Eclipse
Model	AVN827GA
Category	Car Receiver
Language	English