52
52
Bluetooth Handsfree Operation
Before Use
a Bluetooth signal icon
b Battery level indicator
c Roaming area icon
d Reception indicator
■ Bluetooth signal quality icon
Displays the Bluetooth connection status of a
mobile phone.
● When a Bluetooth connection is
established, “ ” and reception level are
displayed.
● A Bluetooth communication antenna is
embedded in the car display.
If a Bluetooth-enabled mobile phone is used
in the following locations or conditions, the
Bluetooth connection status display may
turn grey or Bluetooth connection may not
be possible.
• When the mobile phone is hidden from
the display (when the mobile phone is
behind or under a seat or in the glove box
or console box).
• When the mobile phone is touching or
covered by a metal object to use a
Bluetooth-enabled mobile phone, move
the phone to a location where the blue
display appears.
● When setting the mobile phone to power
saving mode, the Bluetooth connection may
be automatically disconnected. If this
happens, switch off the power saving mode
of the mobile phone.
■ Battery indicator
Displays the battery power remaining for the
mobile phone.
● The battery indicator may not match the
battery indicator of the mobile phone.
Depending on the model, it may not be
possible to display the battery power
remaining.
■ Roaming area icon
Displayed when connected in the roaming
area.
■ Reception indicator
Displays the reception level.
● When “No Service” is displayed, the
location is either outside the service area
or cannot be reached by the signal. In
such situations, the mobile phone itself
cannot be used. Move to a location where
the “No Service” display is no longer
shown.
● Observe the following point when
performing hands-free operation with a
mobile phone.
• The reception level may not match the
display of the mobile phone. Depending
on the model, it may not be possible to
display the reception level.
About the Display
ab c d
To Next Page
Loading...
Need help?
General
