270
270
About Steering Wheel Switches
Other Operations
● Next page is displayed by touching
or .
● It will display Completed when the setting
is completed, then it will return to
Command Select screen and displays
Store on the set command.
● “Error, try once again” is displayed when
the data reading fails.
If “Error, try once again” is shown on the
display, once again select a desired function to
set.
6
Touch the command you wish to set.
7
While pressing the steering switch to
record, touch the until a beep
sounds.
8
Assign the desired functions to the
steering wheel switch switches by
repeating Steps 6 through 7.
9
Touch .
10
Touch after confirming the final
confirmation screen.
Finalise
Done
To Next Page
Loading...
