Eclipse AVN827GA - Page 64

62
62
Bluetooth Handsfree Operation
Before Use
Transferring a call (private mode 
handsfree mode)
When using a Bluetooth mobile phone, you
can transfer calls between the unit and the
mobile phone.
The call is switched from a handsfree call to a
mobile phone call, or from a mobile phone
call to a handsfree call.
Operating with the screen
● Touch again to switch to a
handsfree call.
Operating with the mobile phone
You can transfer calls while making a call,
while talking, and while a call is on hold.
● Switch from a mobile phone call to a
handsfree call to enable touch switch
operations.
● The transfer method and operations vary
depending on the type of mobile phone.
For details of operations on the mobile
phone, see the instruction manual that is
supplied with the mobile phone.
ATTENTION
● Calls cannot be transferred while driving.
● If a call is transferred on the screen, the
transfer may fail and cut off the sound of the
call.
Ending a call
On the Talking screen, touch to end the
call. You can also end the call by hanging up
the mobile phone. When a call ends, the
handsfree screen disappears.
Entering numeric keys
On the Talking screen for outgoing calls,
touch to display the Dial Tone
screen and enable numeric key input.
● :
Send a dial tone that has already been
registered in the phone book.
:
Skip the tones.
1
Touch .
Transfer
Transfer
Dial Tone
Send
Exit