Titanium Interfaces User Guide
clkmux_rule_clocks_routed (error)
Message Unrouted pins driving inputs of clock mux <ins name>:<inputs not routeable>
To fix The software tries to route all of the clocks according to the scheme shown in "Driving the
Global Network" in the data sheet. If it cannot find a mapping, it issues this error. Reassign
the instances to other resources or try using a different PLL output clock (if they are not all are
assigned).
Message Some inputs of clock mux <ins name> were not routed
To fix The software tries to route all of the clocks according to the scheme shown in "Driving the
Global Network" in the data sheet. If it cannot find a mapping for some of the pins, it issues
this error. Reassign the instances to other resources or try using a different PLL output clock (if
they are not all are assigned).
clkmux_rule_core_clock_pin (error)
Message Core clock pin can only be used with dynamic mux enabled
To fix Clocks from the core can only drive the dynamic clock multiplexers (see "Driving the Global
Network" in the data sheet). Enable a dynamic mux (0 or 7) and assign the core clock to it
(Configuring the Dynamic Clock Multiplexers on page 27).
clkmux_rule_core_clock_static_mux (error)
Message Core clock pin <name> not allowed to route through static mux output
To fix Clocks that come from the core can only connect to dynamic multiplexer input (see "Driving
the Global Network" in the data sheet). You need to add the clock to a dynamic mux.
clkmux_rule_dynamic_clock_pin (error)
Message Dynamic clock pin names for <both dynamic muxes/dynamic mux 0/7> <are/is> empty
To fix You need to specify the pin name. Go to Device Setting > Clock/Control Configuration >
<region> > Global Buffers tab.
clkmux_rule_dynamic_clock_select_pin (error)
Message Dynamic clock select pin names for <both dynamic muxes/dynamic mux 0/7> <are/is> empty
To fix You need to specify the pin name. Go to Device Setting > Clock/Control Configuration >
<region> > Global Buffers tab.
clkmux_rule_global_regional_pin (error)
Message Missing global pin name for a regional connection that also connects to global buffer
To fix If you want to use a clock source to drive both the global and regional networks, you need to
specify the name of the clock that drives the global network. See Driving both the Global and
Regional Networks on page 27.
Message Global and regional buffer connections require unique pin name
To fix If you are using both the global and regional buffers, you need to specify unique pin names
for each one.
www.efinixinc.com 29
To Next Page
Loading...