Efinix Titanium - Package;Interface Support Matrix; Interface Block Connectivity

Titanium Interfaces User Guide
Package/Interface Support Matrix
Some interfaces are only available in certain packages. The following table describes which
interfaces are supported in specific FPGA/package combinations for the Efinity
®
software
v2021.2.
Table 2: Titanium Interface/Package Combinations Supported in Efinity
®
Software
v2021.2
Package Ti35 Ti60 Ti90, Ti120, Ti180
W64
F100
F225
M484
Titanium Family Legend:
Oscillator PLL LVDS MIPI RX or
TX Lane
MIPI D-PHY
Controller
DDR DRAM
Controller
Interface Block Connectivity
The FPGA core fabric connects to the interface blocks through a signal interface. The
interface blocks then connect to the package pins. The core connects to the interface blocks
using three types of signals:
• Input—Input data or clock to the FPGA core
• Output—Output from the FPGA core
• Clock output—Clock signal from the core clock tree
www.efinixinc.com 8