iTEMP TMT162 Operating menu and parameter description
Endress+Hauser 93
"Sensor 1/2" submenu
n = Stands for the number of sensor inputs (1 and 2)
Sensor type n → 69
Navigation Setup → Sensor type n
Expert → Sensor → Sensor n → Sensor type n
Connection type n → 70
Navigation Setup → Connection type n
Expert → Sensor → Sensor n → Connection type n
2-wire compensation n → 70
Navigation Setup → 2-wire compensation n
Expert → Sensor → Sensor n → 2-wire compensation n
Reference junction n → 70
Navigation Setup → Reference junction n
Expert → Sensor → Sensor n → Reference junction n
RJ preset value n → 71
Navigation Setup → RJ preset value
Expert → Sensor → Sensor n →RJ preset value
Sensor offset n → 75
n = Stands for the number of sensor inputs (1 and 2)
Navigation Setup → Advanced setup → Sensor → Sensor offset n
Expert → Sensor → Sensor n → Sensor offset n
To Next Page
Loading...
