Endress+Hauser Proline Prosonic Flow P 500 - Page 184

Diagnosis and troubleshooting Proline Prosonic Flow P 500 HART
184 Endress+Hauser
Parameter Description User interface Factory setting
Device name Shows the name of the transmitter.

The name can be found on the
nameplate of the transmitter.
Prosonic Flow 500 –
Manufacturer Displays the manufacturer. Character string comprising
numbers, letters and special
characters
Endress+Hauser
Order code Shows the device order code.

The order code can be found on the
nameplate of the sensor and
transmitter in the "Order code" field.
Character string composed of
letters, numbers and certain
punctuation marks (e.g. /).
–
Extended order code 1 Shows the 1st part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 2 Shows the 2nd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 3 Shows the 3rd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string 2.02.00
Device revision Displays the device revision with which the
device is registered with the HART
FieldComm Group.
2-digit hexadecimal number 0x5D
Device ID Shows the device ID for identifying the
device in a HART network.
6-digit hexadecimal number –
Device type Displays the device type with which the
device is registered with the HART
FieldComm Group.
2-digit hexadecimal number 0x5D (for Prosonic Flow P
500)
Manufacturer ID Displays the device's manufacturer ID
registered with the HART FieldComm Group.
2-digit hexadecimal number 0x11 (for Endress+Hauser)