Endress+Hauser Proline Prosonic Flow P 500 - Page 195

Proline Prosonic Flow P 500 HART Technical data
Endress+Hauser 195
Status input
Maximum input values • DC –3 to 30 V
• If status input is active (ON): R
i
>3 kΩ
Response time Configurable: 5 to 200 ms
Input signal level • Low signal: DC –3 to +5 V
• High signal: DC 12 to 30 V
Assignable functions • Off
• Reset the individual totalizers separately
• Reset all totalizers
• Flow override