Endress+Hauser Proline Prosonic Flow P 500 - Page 97

Proline Prosonic Flow P 500 HART Commissioning
Endress+Hauser 97
Temperature unit
→  97
Density unit
→  97
Reference density unit
→  97
Length unit
→  97
Parameter overview with brief description
Parameter Description Selection Factory setting
Volume flow unit Select volume flow unit.
Effect
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Depends on country:
• m³/h
• ft³/min
Volume unit Select volume unit. Unit choose list Depends on country:
• m³
• ft³
Mass flow unit Select mass flow unit.
Result
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Depends on country:
• kg/h
• lb/min
Mass unit Select mass unit. Unit choose list Country-specific:
• kg
• lb
Velocity unit Select velocity unit.
Effect
The selected unit applies for:
• Flow velocity
• Sound velocity
Unit choose list Country-specific:
• m/s
• ft/s
Temperature unit Select temperature unit.
Effect
The selected unit applies for:
• Temperature
• Electronic temperature parameter
(6053)
• External temperature parameter (6080)
• Reference temperature parameter
(1816)
Unit choose list Country-specific:
• °C
• °F
Density unit Select density unit.
Effect
The selected unit applies for:
• Output
• Simulation process variable
Unit choose list Country-specific:
• kg/dm³
• lb/ft³
Reference density unit Select reference density unit. Unit choose list kg/Nm³
Length unit Select the unit of length. Unit choose list Country-specific:
• mm
• in