Epson EB-L1505UH - Supported Client and CA Certificates

n
Enter a password and press [Enter].
The certificate is imported and a completion message appears.
o
Select your EAP settings as necessary.
• User Name: Enter the user name. You can enter up to 64 single-
byte alphanumeric characters. When entering more than 32
characters, use your Web browser to enter the text. When
importing a client certificate, the name the certificate was issued to
is automatically set.
• Password: Enter the password used for authentication in PEAP,
EAP-FAST, and LEAP. You can enter up to 64 single-byte
alphanumeric characters. When entering more than 32 characters,
use your Web browser to enter the text.
• Verify Server Cert. lets you select whether or not to verify the
server certificate when a CA certificate has been set.
• RADIUS Serv.Name lets you enter the server name to be verified.
p
If you have finished making settings, select Setup complete.
Follow the on-screen instructions to save the settings and close
the menu.
Supported Client and CA Certificates
You can register these types of digital certificates.
Client Certificate (PEAP-TLS/EAP-TLS)
Item Explanation
Format
PKCS#12
Extension
PFX, P12
Encryption
RSA
Hashes
MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length
512/1024/2048/4096 bit
Password *
You need to setup a password. Up to 32 single-byte
alphanumeric characters
CA Certificate (PEAP/PEAP-TLS/EAP-TLS/EAP-FAST)
Item Explanation
Format
X509v3
Extension
DER/CER/PEM
Encryption
RSA
Hashes
MD5/SHA-1/SHA-256/SHA-384/SHA-512
Key length
512/1024/2048/4096 bit
Encoding
BASE64/Binary
* You can set a password using up to 64 alphanumeric characters. When
entering more than 32 characters, use your Web browser to enter the text.
s "Changing Settings Using a Web Browser (Epson Web Control)"
p.220
Wireless Network Projection
135