Epson EB-L1505UH - Adjusting the Height of the Projected Image (for Normal Installment); Adjusting the Horizontal Tilt (for Normal Installment)

Adjusting the Height of the Projected Image (for
Normal Installment)
Extend or retract the front feet to make adjustments. You can adjust the
position of the image by tilting the projector up to 10 degrees.
A
Extend the front feet.
B
Retract the front feet.
a
The larger the angle of tilt, the harder it becomes to focus. Install the
projector so that it only needs to be tilted at a small angle.
Adjusting the Horizontal Tilt (for Normal
Installment)
Extend and retract the front and rear feet to adjust the projector's
horizontal tilt.
A
Extend the front and rear feet.
B
Retract the front and rear feet.
Installing the Projector
43