f
When Do you want to continue adjusting the setting? is
displayed, select Yes or No.
To adjust another tone, select Yes, and repeat the procedure from
step 5.
Frame Interpolation
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
a
Press the [Menu] button while projecting.
b
Select Frame Interpolation from Image, and then press the [ ]
button.
c
Select the level of interpolation from Low, Normal or High.
Set to Off if noise occurs after setting them.
d
Press the [Menu] button to finish making settings.
Adjusting Projected Images
88
To Next Page
Loading...
Need help?
General
