Automatically Detecting Input Signals and
Changing the Projected Image (Source Search)
Press the [Search] button to project images from the port currently
receiving an image.
Using the remote control Using the control panel
*EB-L1755U/EB-L1750U/EB-L1505UH/EB-L1500UH/EB-L1495U/EB-L1490U only
When two or more image sources are connected, repeatedly press
the [Search] button until the target image is projected.
When your video equipment is connected, start playback before beginning
this operation.
a
• You can set up the projector so that it automatically detects an
image signal from another input source and projects the image when
there is no image signal from the current input source.
s Extended - Operation - Auto Source Search p.151
• The following screen is displayed while no image signals are input.
Projecting Images
63
To Next Page
Loading...
Need help?
General
