This section explains how to use the Configuration menu.
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.
a
Display the Configuration menu screen.
b
Select a top menu item.
c
Select a submenu item.
d
Change settings.
a
When "[Default]: Reset" is displayed on the guide under the
menu, pressing the [Default] button on the remote control
returns the settings being adjusted to their default values.
e
Press the [Menu] button to finish making settings.
Using the Configuration Menu
141
To Next Page
Loading...
Need help?
General
