Image Menu
Settable items vary depending on the image signal and source currently
being projected. Setting details are saved for each color mode.
s "Automatically Detecting Input Signals and Changing the Projected
Image (Source Search)" p.63
Submenu Function
Color Mode
You can select the quality of the image to suit your
surroundings.
s "Selecting the Projection Quality (Selecting Color
Mode)" p.78
Brightness
Adjusts the image brightness.
Contrast
Adjusts the difference between light and shade in the
images.
Color Saturation
Adjusts the color saturation for the images.
Tint
You can adjust the image tint.
Submenu Function
Sharpness
Standard: You can adjust the image sharpness.
Thin Line Enhancement: If this parameter is set to a
positive value, details such as hair or fabric patterns will be
enhanced.
Thick Line Enhancement: If this parameter is set to a
positive value, the outline, background, and the other main
parts of the objects in the image will be enhanced to show
them clearly.
White Balance
You can adjust the overall tint of the image.
Color Temp.: You can adjust the overall tint of the image
within 14 stages from 3200K to 10000K. The image is tinted
blue when a high value is selected and tinted red when a
low value is selected. When Color Mode is set to Dynamic,
the set Color Temp. may differ from the actual Color Temp.
of the light from the projector. Use this menu as a guide.
G-M Correction: The color tone is tinted red when set to a
negative value, and tinted green when set to a positive
value.
Offset R/G/B, Gain R/G/B: You can adjust the offset and
gain of each color R (red), G (green), and B (blue)
individually.
Frame Interpo-
lation
*1, 2, 3, 4, 5
You can play fast moving images smoothly by producing
intermediate frames between the original frames.
List of Functions
145
To Next Page
Loading...
Need help?
General
