Name Function
i
Remote control light-
emitting area
Outputs remote control signals.
Handy remote control operations
You can perform the following operations by simply pressing one of the
buttons on the remote control.
Operation Set
Reverse the projected image vertically.
(Switch the Projection between Front and
Front/Ceiling)
s "Changing the direction of the image
(projection mode)" p.30
Hold down the [A/V Mute] button for more
than five seconds.
Selecting the password security settings.
s "Managing Users (Password
Protection)" p.121
Hold down the [Freeze] button for more
than five seconds. The Password Protection
screen is displayed, and you can select
various settings.
Locking or unlocking some of the operation
of the buttons on the remote control.
s "Remote control button lock" p.124
Hold down the [
] button for more than
five seconds.
Initializing the settings for the Remote
Receiver in the Configuration menu.
(Enables all Remote receivers for this
projector.)
Hold down the [Menu] button for more than
15 seconds.
Operation Set
Displaying frequently used Configuration
menu items.
Press the [User1], [User2], or [User3]
button. You can set the menu item you want
to assign to each button in User Button.
s Settings - User Button p.149
The following items can be assigned.
Light Source Mode, Multi-Projection,
Resolution, Image Processing, On-Screen
Display, Display the QR Code, Image
Enhancement, Frame Interpolation,
Screen Matching, Color Calibration
When you press the button for which On-
Screen Display is assigned, menus or
messages are not displayed on the screen.
When you press the same button, they are
displayed again. If On-Screen Display is
enabled, you cannot operate the
Configuration menu (except for switching
the color mode and input source).
Replacing the remote control batteries
If delays in the responsiveness of the remote control occur or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. When this happens, replace them with new
batteries. Have two AA size alkaline or manganese batteries ready. You
cannot use other batteries except for the AA size alkaline or manganese.
Attention
Make sure you read the following manual before handling the batteries.
s Safety Instructions
Part Names and Functions
24
To Next Page
Loading...
Need help?
General
