Operating procedures
Projecting on a split screen
a
Press the [Split] button on the remote control while projecting.
The currently selected input source is projected on the left of the
screen.
Remote control
a
You can perform the same operations from the configuration
menu.
s Settings - Split Screen p.149
b
Press the [Menu] button.
The Split Screen Setup screen is displayed.
c
Select Source, and then press the [ ] button.
d
Select each input source for Left and Right.
a
You can perform the same operations using the following
procedure.
s "Automatically Detecting Input Signals and Changing the
Projected Image (Source Search)" p.63
s "Switching to the Target Image by Remote Control" p.64
e
Select Execute, and then press the [ ] button.
To switch the source during split screen projection, start the
procedure from step 2.
Projection Functions
109
To Next Page
Loading...
