a
You can fine tune the corrected results. Select Quick Corner on the
screen from step 4 to adjust the tilt of the image.
s "Quick Corner" p.68
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode Application
Dynamic
This is the brightest mode. Ideal for use in a bright room.
Presentation
The images are vivid and brought to life. Ideal for
making presentations or watching a TV program in a
bright room.
Natural
Reproduces colors faithfully. Ideal for projecting still
pictures such as photos.
Cinema
Gives images a natural tone. Ideal for watching films in a
dark room.
BT.709
Produces images that conform to the ITU-R BT.709.
DICOM SIM
This produces images with clear shadows. Ideal for
projecting X-ray photographs and other medical
images. The projector is not a medical device and cannot
be used for medical diagnosis.
Multi-Projection
Minimize the color tone difference between each
projected image. Ideal for projecting from multiple
projectors.
Each time you press the [Color Mode] button, the Color Mode name is
displayed on the screen and the Color Mode changes.
Remote control
a
You can set Color Mode from the Configuration menu.
s Image - Color Mode p.145
Setting the Brightness
Set the brightness for the light source.
a
Press the [Menu] button while projecting.
b
Select Brightness Settings from Settings.
Adjusting Projected Images
78
To Next Page
Loading...
Need help?
General
