Others menu
Submenu Function
Secure HTTP
To strengthen security, communication between the projector
and computer in Epson Web Control is encrypted. When setting
security with Epson Web Control, we recommend setting this to
On.
Web Server Cert.
Imports the Web server certificate used in Secure HTTP.
Priority Gateway
For the priority gateway, select either Wired or Wireless.
AMX Device Dis-
covery
When you want to allow the projector to be detected by
AMX
Device Discovery
g
, set this to On. Set this to Off if you are not
connected to an environment controlled by a controller from
AMX or AMX Device Discovery.
Submenu Function
Crestron Room-
View
Set this to On only when monitoring or controlling the projector
over the network using Crestron RoomView
®
. Otherwise, set
this to Off.
s "About Crestron RoomView
®
" p.232
Changes in projector settings take effect upon restarting.
When this is set to On, the following functions are not available.
• Epson Web Control
• The Message Broadcasting feature in the Epson Projector
Management software
Control4 SDDP
Set to On if you want to enable the acquisition of the device
information by
Control4
®
Simple Device Discovery Protocol
(SDDP)
g
.
Art-Net
Art-Net: Set this to On to control the projector using Art-Net.
s "Art-Net" p.237
Net/Sub-Net/Universe: Sets the projector's Net/Sub-Net/
Universe.
Start Channel: Sets the start channel that handles Art-Net.
s
"Channel definitions" p.237
Message Broad-
casting
Set this to On to receive information sent by the Message
Broadcasting feature in the Epson Projector Management
software.
Download software and User's Guides from the following Web
site.
http://www.epson.com
List of Functions
165
To Next Page
Loading...
Need help?
General
