Submenu Function
Image Enhance-
ment
You can adjust the image resolution.
s "Adjusting Image Resolution (Image Enhancement)"
p.89
4K Enhancement
*6
: (EB-L1755U/EB-L1750U/EB-L1505UH/
EB-L1500UH/EB-L1495U/EB-L1490U only) You can project
at a doubled resolution.
Image Preset Mode: You can select the optimal setting
according to the projected image from five presets prepared
in advance.
Noise Reduction
*2, 4, 7
: You can smooth out the roughness
in progressive images.
MPEG Noise Reduction
*2, 7
: You can reduce dot and block
noise that occurs in outlines when projecting MPEG movies.
Super-resolution
*7
: To display a crisp image, you can
reduce the blurring that is created on the edge when the
resolution of the image signal is scaled up and projected.
Detail Enhancement
*7
: You can enhance the contrast of
details in an image.
Reset
*7
: Returns the selected preset to its defaults.
Advanced
You can make adjustments by choosing the following items.
Gamma: You can adjust the coloring by selecting one of the
gamma correction values, or referring to the projected
graph.
RGBCMY: You can adjust the hue, saturation, and
brightness of each color R (red), G (green), B (blue), C
(cyan), M (magenta), Y (yellow) individually.
Deinterlacing
*4
: (Only when the input signal is 480i, 576i,
or 1080i) You can convert interlace signals into progressive
signals. (IP conversion)
Off is ideal for images with a large amount of movement,
Video for general video images, and Film/Auto for movie
films, computer graphics, and animation.
Submenu Function
Dynamic Con-
trast
*8
Set to Normal or High Speed to adjust the iris to obtain
the optimum light for images being projected. Select High
Speed to make faster iris corrections to match the speed of
the scene.
Reset
You can reset all adjustment values for the Image menu to
their default settings. See the following to return all menu
items to their default settings.
s "Reset Menu" p.168
*1
This cannot be set when E-Zoom is used.
*2 This cannot be set when inputting signals whose resolution is higher than that
of WUXGA signals or when 4K Enhancement is enabled.
*3 This cannot be set when Edge Blending is set to On, Scale is enabled, or
Image Processing is set to Fast 1.
*4 This cannot be set when Image Processing is set to Fast 2.
*5 This cannot be set when Aspect is set to V-Zoom.
*6 This cannot be set when Aspect is set to Native.
*7
This cannot be set when Image Preset Mode is set to Off.
*8 This can be set only if Color Mode is set to Dynamic or Cinema.
List of Functions
146
To Next Page
Loading...
Need help?
General
