Submenu Function
Advanced
You can set by choosing the following items.
Video Range: Select the video range for the input signal from the
HDMI port, DVI-D port, HDBaseT port, or SDI. Set to
Expanded if you are concerned about misadjusted black levels or
blown out highlights in the image.
Input Signal: Select an input signal from the Computer port or
BNC port. If set to Auto, the input signal is set automatically
according to the connected equipment. If colors do not appear
correctly when set to Auto, select the appropriate signal
according to the connected equipment.
Image Processing: Changes settings for image processing.
• Fine: When Frame Interpolation is On, Frame Interpolation
is enabled.
• Fast 1: Images are displayed quicker without any loss in image
quality.
• Fast 2: Images are displayed quicker than Fast 1.
EDID: (Displayed when the current source is HDMI, HDBaseT,
or DVI-D) Disconnect the cable for the image currently being
projected from the projector, and then make settings. Change the
EDID of the current source when projecting multiple images
with different resolutions to display the image correctly. After
changing the EDID, restart the projector.
The settings for WUXGA projectors are 3840x2160/30Hz,
1920x1200/60Hz (default), 1920x1080/60Hz,
1600x1200/60Hz, and 1400x1050/60Hz.
The settings for SXGA+ projectors are 1920x1200/60Hz,
1920x1080/60Hz, 1600x1200/60Hz, 1400x1050/60Hz
(default), and 1024x768/60Hz.
DDC Buffer: (Displayed when the current source is HDMI or
DVI-D) Setting this to On can sometimes improve images that
are not displayed correctly from devices connected using an
HDMI or DVI extension cable.
Scale
When using multiple projectors to project one image, adjust the
range of the image displayed by each projector.
s "Displaying a Scaled Image" p.106
Submenu Function
Reset
You can reset all adjustment values on the Signal menu to their
default settings, except for Input Signal and EDID.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.168
List of Functions
148
To Next Page
Loading...
Need help?
General
