Caution
Do not place the projector on an unstable surface, such as on an unstable table
or tilted surface. When projecting vertically, install the projector appropriately
to prevent the projector from falling.
Otherwise it may cause an injury.
Attention
• Do not install the projector in a location that is subject to vibration or
shock.
• Do not install the projector near a high-voltage line or object that generates
magnetism. Otherwise the projector may not work correctly.
• Do not use or store the projector in a location that is subject to extreme
temperatures. Also, avoid sudden temperature changes.
Make sure you use or store the projector in a place that is within the
following operating or storage temperature ranges.
- Operating temperature range
0 to +50ËšC (Altitude of 0 to 1,500 m, no condensation)
0 to +45ËšC (Altitude of 1,501 to 3,048 m, no condensation)
- Storage temperature range: -10 to +60ËšC (No condensation)
• When using at an altitude that exceeds 1,500 m, set High Altitude Mode to
On.
s
Extended - Operation - High Altitude Mode p.151
• The projector can be installed at any angle. There is no vertical or horizontal
limit to how the projector can be installed.
• You may need dedicated installation mounts to tilt and install the projector.
Contact a professional and prepare the mount.
• Plan so that the mount does not fall.
Safety Warning and Cautions
4
To Next Page
Loading...
Need help?
General
