12
Cautions on Power Supply
CAUTION
Install the cables and optional products in the proper direction
according to the proper procedures.
Failure to install correctly may cause fire or injury.
Follow the instructions in this manual to install them properly.
(U "Connecting the Interface Cable" on page 32)
Befo
re moving the product, shut down and unplug the product, and
make sure that all the cables are disconnected.
Failure to do so may damage a cable, causing electric shock or fire.
Do not store or transport the product while it is tilted, standing, or
upside down.
Doing so may cause the ink to leak.
WARNING
Do not use other than the specified AC adapter. In addition, do not use
the specified adapter with another device. (U "Connecting a Power
Supp
ly" on page 31)
Doing so ma
y cause electric shock or fire.
Observe the following points when handling the AC adapter.
There is a risk of electric shock or fire.
∗ Do not use in a location where rain or water will get on the AC
adapter.
∗ Do not suspend the product by the power cord.
∗ Do not allow a clip or other metal object to touch the connectors.
∗ Do not cover with bedding.
Do not allow dust or other foreign material to adhere to the power
plug.
Accumulated dust or foreign material may cause electric shock or fire.
Insert the power plug securely all the way into the outlet.
Failure to insert the plug securely may cause electric shock or fire.
Be sure your AC power cord meets relevant safety standards of the
area where you plan to use it.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General