13
Cautions on Ink Cartridges
WARNING
Do not use a damaged power cord.
There is a risk of electric shock or fire.
Contact qualified service personnel for advice if the power cord is
damaged.
Furthermore, observe the following points so as not to damage the power
cord.
∗ Do not modify the power cord.
∗ Do not place heavy objects on the power cord.
∗ Do not forcibly bend, twist, or pull the power cord.
∗ Do not lay the power cord near a heating appliance.
Do not insert or remove the power plug with a wet hand.
Doing so may cause electric shock.
Do not connect many power cords to one outlet.
Doing so may cause fire.
Supply power directly from a power outlet.
Regularly disconnect the power plug from the outlet and clean the
base of the prongs and between the prongs.
Leaving the power plug connected to the outlet for a long period of time
may cause dust to accumulate on the base of the power plug prongs,
resulting in a short and fire.
Hold the plug and do not pull the cord when disconnecting the power
plug from the outlet.
Pulling the cord may damage the cord or deform the plug, causing electric
shock or fire.
Do not remove and insert the power plug from/to the outlet while the
power of the product is in the on state.
There is a risk of electric shock or fire.
CAUTION
To ensure safety, unplug the product before leaving it unused for an
extended period.
CAUTION
The ink cartridges that can be used differ depending on the model
number of the product. Use ink cartridges suitable for the model
number of your printer. (U "Ink cartridge" on page 199)
Do not to
uch the IC chip on an ink cartridge.
Doing so may result in normal operation and printing becoming no longer
possible.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
