Epson TM-C3500 - Continuous Paper (Black Marks) and Fanfold Paper

180
Continuous Paper (Black Marks) and Fanfold Paper
When Borderless Printing Enabled
Margins at top, bottom, right, and left: 0 mm (typical value)
c IMPORTANT
Set the perforated line interval so that it becomes an integral multiple of the
issuing interval.
Q Note
The maximum value of the print area width is 104 mm.
Paper width
0.5 to 1.0 mm
Issuing interval (Ph)
Auto cut position
Auto cut position
Paper feed
direction
Print area
Print area width
Perforated line interval (Pm)
Perforated line
Auto cut position
Perforated line
Paper width
center
Black mark position
(back side)
15.0 mm or more
(When not auto cutting, 8.0
mm or more)
Downloaded from ManualsNet.com search engine