30
Installation
Provide sufficient space in a location appropriate for installation.
Location Appropriate for Installation
Install the printer in a location as follows.
• On a level and stable surface with sufficient strength to support the weight of the printer
(approx. 12.0 kg [26.45 lb]).
• On an area larger than the bottom surface of the printer. (U "Overall dimensions" on page
163)
• In
a well-ventilated location leaving a clearance of 10 cm {3.93"} or more from the air vent of
the printer to the wall.
• In a location free of vibration and impacts.
• In a location where a dedicated power outlet is available.
• In a location where you can load and remove paper without difficulty.
• In a location with sufficient space around the printer to allow for installation of accessories,
replacement of consumable products, and daily cleaning.
• In a location meeting the guaranteed environmental conditions. (U "Specifications" on page
161)
CAUTION
The weight of the printer is approximately 12.0 kg {26.45 lb}. When lifting the
printer, perform the work with the correct posture. For example, bend your
knees a sufficient amount. Lifting the printer with an inappropriate posture
may cause injury to the worker or damage to the printer.
10 cm {3.93"}
10 cm {3.93"}
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
