142
Head Cleaning
Executing from the Operation Panel
Press the Cleaning button for at least 3 seconds to run a head cleaning.
Executing from Printer Driver
1
Start the printer driver. (U "How to Display the Printer Driver" on page 73)
2
Click Manual Head Cleaning on the Printer Utilities tab.
c IMPORTANT
• Do not turn off the power or open the covers during head cleaning. Doing
so may cause printing malfunction.
• Do not run the head cleaning more than necessary. Ink is consumed
because ink is discharged from the head to clean it.
• If there is not much ink remaining, head cleaning may not be possible.
Replace the ink cartridges and then try again. (U "Replacing the Ink
Ca
r
tridges" on page 44)
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
