71
Self-Test Printing
The self-test printing function allows you to print the firmware version, the printer settings
such as the nozzle check mode and media detection settings, and nozzle check patterns that can
be used to check the nozzles for clogging.
The procedure for the self-test printing is described below.
1
Load continuous paper or full-page labels. (U "Loading and Replacing
Roll Paper" on page 46)
c IMPORTANT
The printer will print on the loaded paper regardless of the media settings of
the printer driver. In the case of die-cut labels, the printer will print on the
backing paper, which may lead to hands getting dirty.
It is recommended to use continuous paper or full-page labels.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General