161
Specifications
This chapter describes the specifications of the printer.
Specification
Printing method Serial inkjet, dot matrix
Four-color printing
Paper feed method Forward and reverse friction feed
Auto cutter Cutting method By separated-blade scissors
Cutting type Full cut (cuts paper completely)
Print density 360 dpi x 360 dpi, 720 dpi x 360 dpi
Print speed Print quality setting: Speed
360 x 360 dpi
(width x height)
Paper width 56 mm: 95 mm/s
Paper width 72 mm: 89 mm/s
Paper width 104 mm: 78 mm/s
Print quality setting:
Quality (Mode1)
720 x 360 dpi
(width x height)
Paper width 56 mm: 52 mm/s
Paper width 72 mm: 48 mm/s
Paper width 104 mm: 42 mm/s
Print quality setting:
Quality (Mode2)
720 x 360 dpi
(width x height)
Paper width 56 mm: 30 mm/s
Paper width 72 mm: 27 mm/s
Paper width 104 mm: 24 mm/s
Interface LAN (100 Base-TX/10 Base-T)
USB 2.0 high speed
Weight Approx. 12.0 kg
(Not including the ink cartridge, maintenance
box, AC adapter, and roll paper)
CAUTION
Use a shielded cable of category 5 or higher for the LAN cable.
Q Note
Print speeds are measurement results obtained under Epson’s operating
conditions. They will vary depending on the print data and environmental
conditions.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
