37
Attaching the Paper Ejection Tray
Attaching the supplied paper ejection tray to the printer allows you to temporarily collect printed
labels.
The paper ejection tray can hold the paper of the following sizes.
Maximum paper size: 105 (W) x 148 (L) mm
Minimum paper size: 76 (W) x 54 (L) mm
Attach the paper ejection tray by following the steps below.
1
Attach the paper ejection tray by hooking it onto the hooks on the under
side of the paper ejection guides.
2
Pull the lever at the bottom right of the paper ejection tray to release the
lock.
Q Note
In the case of roll paper, the paper is curled so if multiple labels or sheets are
printed and ejected, they may overflow the paper ejection tray.
Downloaded from ManualsNet.com search engine