Epson TM-C3500 User Manual

170
Die-cut label (black marks)
c IMPORTANT
• Paper with holes or cutouts cannot be used.
• If the backing is synthetic paper or film, cutting by hand will be difficult
even if there are perforated lines, so do not use perforated lines.
Q Note
Depending on the shape of die-cut labels, the labels may peel off their
backing paper inside the printer. When you want to use die-cut labels that do
not meet the specifications, contact your dealer for advice.
Label width
Waste part
Backing paper width
Label length
Gap between labels
Corner R
Paper without waste part
Waste part
Paper without the left and right waste parts
Waste part
Waste part
Waste width
Waste width
Label length
Gap between
labels
Corner R
Backing paper width
Label part
Label width
Backing paper
Label
Waste part
Mark width
Mark center position
Mark length
Mark interval
Paper width center
Perforation position
2 mm or more
Fanfold paper
<Back side> <Print side>
Paper width center
Paper feed
direction
Backing paper
Label
Downloaded from ManualsNet.com search engine

Epson TM-C3500 Specifications

General

Print Resolution	720 x 360 dpi
Ink Colors	Cyan, Magenta, Yellow, Black
Ink Cartridges	Individual ink cartridges
Color	Yes
Print Speed	Up to 103 mm/sec
Media Types	Roll paper, Fanfold paper
Interface	USB, Ethernet
Dimensions	310 x 283 x 261 mm
Weight	12 kg
Cutter	Auto cutter
Media Width	25 - 112 mm