31
Connecting a Power Supply
Connect a power supply by following the steps below.
1
Insert the DC connector of the AC adapter firmly all the way into the DC-IN
connector of the printer.
2
Insert the connector of the AC cable firmly all the way into the AC inlet of
the AC adapter.
3
Insert the power plug firmly all the way into an outlet with a ground.
4
Place the AC adapter with its label facing downward.
WARNING
Read the precautions on the power supply carefully before connecting the
power supply. (U "Cautions on Power Supply" on page 12)
Do not use other than the specified AC adapter (AC adapter, K model
number: M248A). In addition, do not use the specified adapter with another
device. Doing so may cause electric shock or fire.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
