166
Continuous Paper (Black Marks)
Paper type Plain paper / matte paper
Form Roll paper
Paper width 30 to 108 mm
Black mark width 13 mm or more
Label length 15 to 1117.6 mm
Black mark length 4 mm or more (margin part 4 mm or more)
Black mark center position 8.5 ± 1 mm
Black mark interval 8 to 1117.6 mm
Paper thickness 0.084 to 0.124 mm
Roll paper core Outer diameter: 44.1 mm or more
Outer diameter Max. 101.6 mm
Winding direction Printing surface must be facing outside.
c IMPORTANT
Paper with holes or cutouts cannot be used.
Mark width
Mark center position
Mark length
Mark interval
Paper width center
Perforation position
0.5 mm or more
Fanfold paper
<Back side> <Print side>
Paper width center
Paper feed
direction
Paper
Downloaded from ManualsNet.com search engine